There are a number of factors affecting vitamin stability in animal feeds. These factors may vary depending on whether the vitamins are naturally occurring in the feed materials, or added to the diet in a premix form.
The following is a discussion of these factors in either case, together with the strategies to be adopted for improving the stability and utilization of the dietary vitamins by animals.
Forage plays a significant role in the supply of vitamins to ruminants. However, the vitamin content of forages is highly variable and unpredictable due to the following stability factors:
Grasses generally have the lowest level of ᵦ-carotene (146 mg/ kg DM) while legumes have the highest level (438 mg kg21 DM). The differences in the level of ᵦ-carotene are mainly due to the ratio of leaf to stem in the plant and capacity of the plant to synthesize carotene
The levels of ᵦ-carotene and -tocopherol in the grasses and legumes are very high in the young stages and reduce as the plant matures. At maturity, plants may have 10% (in the case of grasses) to 40% (for legumes) of the value of the carotene of immature plants. The principal factor responsible for the variation in levels of ᵦ-carotene and -tocopherol of forages in the course of their maturation is the change in the ratio of leaf to stem because the leaves are considerably richer in these vitamins than the stems. The formation of stems is accompanied by an increase in the concentration of DM; there is thus a negative correlation between the DM content and the level of ᵦ-carotene.
For a given stage of growth, a forage is richer in ᵦ-carotene and -tocopherol when grown under rainy conditions with a low temperature. The positive influence of these conditions is related to the increase in the leaf-to-stem ratio which contributes more to the increased level of ᵦ-carotene -tocopherol.
Drying crops either on the ground or in barns reduces the vitamin levels. It was found that in excess of 80% of carotene from clover was lost during the first 24 hours of sun-drying and was practically zero when the crop was dried for 4–5 days in the sun. Forages exposed to rain and then dried in the sun have less ᵦ-carotene than sun-dried forage. Thus, if the forage rests exposed to the sun for an extended period of time and at the same time is exposed to several showers, the destruction of ᵦ-carotene is nearly complete.
Stability of some vitamins such as vitamin A may be adversely affected if mouldy or spoiled silages are fed for long periods. Symptoms of a vitamin A deficiency include reproductive problems in both males and females. Pregnant cows may abort, retain their placenta, and develop a uterine infection or give birth to weak, dead, or blind calves. Bulls with a vitamin A deficiency produce semen with low numbers of sperm and high numbers of abnormalities. To prevent moulds from developing in silage, production practices that preserve quality should be strictly followed. Accepted silage-production practices include:
– Harvesting at the proper moisture content (30-35 %)
– Chopping uniformly at the proper length to allow for better compaction and exclusion of air
– Silo size should be matched to herd size to ensure daily removal of silage at a rate faster than deterioration can occur
– Filling the silo rapidly
– Packing the silage sufficiently
– Covering the horizontal silo immediately during or after filling
– Using silage additives (such as ammonia, propionic acid, microbial cultures, or enzymatic silage) may be beneficial in preventing mould growth.
With the advent of intensive livestock production, the production of synthetic vitamins in a premix form was essential due to the variable and unpredictable vitamin content of forages.
Stability of the synthetic vitamins may, however, be influenced by the following factors:
Vitamins are quite sensitive to their physical and chemical environment, with oxidation-reduction reactions due to contact with trace minerals being the predominant cause of vitamin instability. The type of trace mineral can have a significant effect on vitamin stability. Free metal ions, sulfates, carbonates, and oxides (the primary forms of inorganic trace minerals used) are the most reactive, while chelates (a classification of organic trace minerals) are the least responsive. Therefore, the current practice of over-fortification with inorganic trace minerals can inadvertently have a negative effect on vitamin stability and, thus, negatively impact animal health and performance indirectly.
Pelleting is typically the most aggressive process against vitamins due to exposure to heat. There is, however, little or no vitamin destruction with pelleting temperatures of up to 80°C. At higher pelleting temperature, chemical modification can enhance the stability of some vitamins such as vitamin C which is easily oxidised and destroyed in this case. The esterification of the 2-carbon atom of L-ascorbic acid with phosphate protects L-ascorbic acid from oxidation. Coatings or encapsulation with carbohydrate, protein, or ethyl cellulose gives vitamins such as vitamin A and D3 greater protection against heat, moisture, and pressure during pelleting.
Premixes containing vitamins can be stored for about 3 to 4 months. However, storage time should not exceed 60 days if choline and trace minerals are present in combination with vitamins in the premix. Also, the use of barriers such as plastic-lined bags aid in reducing the absorption of moisture, thereby improving vitamin stability.
Salah H. (22 May 2020). Factors affecting vitamin stability in animal feed[Blog Post]. https://www.allaboutfeed.net/animal-feed/feed-additives/factors-affecting-vitamin-stability-in-animal-feed/